Woolich Racing Honda CBR1000RR Flash Kit

Discussion in 'RB Engineering / Woolich Racing' started by RB Engineering, Nov 22, 2015.

  1. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45
    Hi guys see below the info & prices for members of 1000RR only:-

    Available for:-
    2008
    2009
    2010-11
    2012-13
    2014-15

    In development for 2006-07 & HRC ECU's

    1000RR price below includes fully insured and Tracked Delivery.

    Standard Flash Kit - Interface, software, bin file & on bike harness £260 (Normally £285 inc P&P)

    Log Box Kit - Log Box, software, bin file & on bike harness £315 (normally £345 inc P&P)

    Log Box & Wideband Kit - Log Box, software, bin file & on bike harness, plus it comes with Wideband Controller, sensor and fitting kit £470 (normally £505 inc P&P)


    Optional Bench Harness £67.50p (Normally £76.50p inc P&P)
    Additional Bin Files £65 (Normally £70)

    honda ecu wrt screen main.jpg

    Cheers
    Rich
     
    #1 RB Engineering, Nov 22, 2015
    Last edited: Nov 23, 2015
    • Like Like x 1
  2. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45
    Hi Guys, 2009 CBR1000RR has now been released this morning.

    Cheers
    Rich
     
    • Like Like x 1
  3. ColinBR

    ColinBR God Like

    Joined:
    Oct 8, 2011
    Messages:
    6,442
    Likes Received:
    3,236
    Nice!

    Now I can start thinking of getting the track bike setup.

    Just waiting on my engine arriving this week and we should be ready to see what we can do with this Rich ;)
     
    • Like Like x 2
  4. Pgm

    Pgm Member

    Joined:
    Dec 23, 2015
    Messages:
    173
    Likes Received:
    23
    Hi Rich is there a discount code or do I need to phone in to get the discount ? Thanks.
     
  5. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45
    Hi mate just let me know which kit you want and your paypal email. I will then send you a paypal invoice.
    A private message on here is fine

    Cheers
    Rich
     
  6. Pgm

    Pgm Member

    Joined:
    Dec 23, 2015
    Messages:
    173
    Likes Received:
    23
    Pm sent
     
  7. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45
    Hi Paul, Invoice sent to paypal, I cannot find the parts fiche for 2016 SP ABS, if you could get me the ECU part number I can see if it is in the software, its not a problem if it isn't as we can add it in.

    Cheers
    Rich
     
  8. Mr OCD

    Mr OCD Well-Known Member

    Joined:
    Nov 9, 2014
    Messages:
    2,300
    Likes Received:
    511
    How does the flash kit work? I download file from bike and send to you which I then upload to bike?

    I have a 2010 with PCV5 and custom map at the moment.
     
  9. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45
    It actually depends on which kit you go for but if you just want one of our upgraded maps put in your ECU, you can just send in your ecu without purchasing a kit too.

    Options are:-

    1) Standard Flash Kit - Allows mapping of your ECU on the bike ideally on the dyno. £342 inc VAT

    2) Wide band & log box - Allows mapping of your ECU and auto tuning of the fuel maps - No dyno required to get a custom fuel map. £606 inc VAT

    3) Mail in ECU flash - Vastly improved mapping over stock and will run well on the bike but also good to use in conjunction with a PCV if you get it mapped to suit the changes. £180 inc VAT

    4) Full custom Remapping of your ECU on the Dyno. £350 inc VAT

    Discount to all forum members.
    Cheers Rich
     
  10. Mr OCD

    Mr OCD Well-Known Member

    Joined:
    Nov 9, 2014
    Messages:
    2,300
    Likes Received:
    511
    Thanks for the information Rich. I might as well just go for full custom remapping on the dyno.

    The bike was custom mapped with PCV, but what appeals with the Woolich flash is the ability to add fuel to solve the on-off throttle response. i.e. the ECU cutting fuel completely when the throttle is closed fully creating an annoying stutter when you open the throttle from closed. This is something that can't be mapped out with PCV.
     
    • Like Like x 1
  11. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45
    No problem at all, just let me know when you are ready and we can fit you in to the schedule.
    Thanks again
    Rich
     
  12. Mr OCD

    Mr OCD Well-Known Member

    Joined:
    Nov 9, 2014
    Messages:
    2,300
    Likes Received:
    511
    Where are you based Rich? I'm near Manchester.

    It will obviously be after Christmas earliest :)
     
  13. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45
    No problem at all mate, we are based on the Gloucestershire/Monmouthshire near the Severn Bridge. If we are too far away for you, I can send you to another tuner who uses our equipment.

    No problem either way to me mate.

    Cheers
    Rich
     
    • Like Like x 1
  14. Mr OCD

    Mr OCD Well-Known Member

    Joined:
    Nov 9, 2014
    Messages:
    2,300
    Likes Received:
    511
    Bit of a trip that... :D

    Who do you have near Bolton / Manchester?
     
  15. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45
    It's no problem mate, the ones that spring to mind as close (ish) are Race HQ in Leeds and P3 Tuning in Liverpool.

    Cheers
    Rich
     
    • Like Like x 1
  16. RB Engineering

    RB Engineering New Member

    Joined:
    Nov 18, 2015
    Messages:
    49
    Likes Received:
    45

    Oh sorry there is also Hammer & Tongs Performance in Warrington

    Cheers
    Rich
     
    • Like Like x 1
  17. Dave dunlop

    Dave dunlop Elite Member

    Joined:
    Jan 11, 2015
    Messages:
    1,903
    Likes Received:
    1,034
    Pm sent Rich.... cheers
     
  18. Mr OCD

    Mr OCD Well-Known Member

    Joined:
    Nov 9, 2014
    Messages:
    2,300
    Likes Received:
    511
    Time to get this sorted. Emailed all three tuners :)
     
    • Like Like x 1
  19. johnd

    johnd Active Member

    Joined:
    Nov 8, 2013
    Messages:
    266
    Likes Received:
    133
    I went over to Hammer n Tongs today. Was happy with the chat I had with them so booked in for 20th June.
     
  20. Mr OCD

    Mr OCD Well-Known Member

    Joined:
    Nov 9, 2014
    Messages:
    2,300
    Likes Received:
    511
    Not heard good things about them tbh. So I've taken them off my list.

    P3 Tuning is sorting mine :)
     

Share This Page