Carbon Akrapovic Exhaust to suit 2007-2013 Fireblade - SOLD

Discussion in 'Parts, Accessories & Clothing' started by ccr32, Jul 23, 2017.

  1. ccr32

    ccr32 Active Member

    Joined:
    Nov 17, 2014
    Messages:
    321
    Likes Received:
    56
    Selling my Akrapovic from my 2013 Fireblade. Believe this will fit any Fireblade prior to when Honda moved the cat from the standard exhaust on pre-2014 models to the end of the headers on 2014-on models.

    This Akrapovic is the version with the integrated cat and flapper in the (s-bend) link pipe - your experience may vary but I found this version to work far better with my bike than any others or other brands. Straight-through link pipes do tend to make more power, but are quite rough and 'hunt' around idle. Oddly, a Yoshimura exhaust I tried on my bike prior to the Akra also did the same thing.

    The flapper valve on this exhaust works off the standard exhaust servo - you don't have to use it, but found that my bike ran better when I did.

    The can is in excellent condition with no scratches or cracks in the carbon. The link pipe has also been laboriously hand-polished by my own fair hands so you can see your face in it! Totally unnecessary, but looks so much better when on the bike.

    These are £600ish new - this one is for sale for £375.
     
  2. ccr32

    ccr32 Active Member

    Joined:
    Nov 17, 2014
    Messages:
    321
    Likes Received:
    56
    20170723_102003.jpg 20170723_102038.jpg 20170723_102057.jpg Forgot to mention, also comes with the carbon strap, bolts/spacers/washers to fit, and the original Akrapovic exhaust springs.
     
  3. Jon26

    Jon26 New Member

    Joined:
    Jun 27, 2017
    Messages:
    17
    Likes Received:
    2
    If it's still for sale can I get a part number to check it'll fit a 2010 ?
     
  4. Mr OCD

    Mr OCD Well-Known Member

    Joined:
    Nov 9, 2014
    Messages:
    2,300
    Likes Received:
    511
    It will fit. :)
     
  5. Mr OCD

    Mr OCD Well-Known Member

    Joined:
    Nov 9, 2014
    Messages:
    2,300
    Likes Received:
    511
    It will fit. :)
     
  6. sps170373

    sps170373 Moderator
    Staff Member

    Joined:
    May 24, 2013
    Messages:
    7,860
    Likes Received:
    3,091
    Don't forget there is a difference in cable length between non abs and abs versions
     
  7. Jon26

    Jon26 New Member

    Joined:
    Jun 27, 2017
    Messages:
    17
    Likes Received:
    2
    Thanks chaps,mines a non ABS so I'll have to find out from ccr32 what version it is for.
     
  8. ccr32

    ccr32 Active Member

    Joined:
    Nov 17, 2014
    Messages:
    321
    Likes Received:
    56
    Now sold. Thanks all.
     

Share This Page