I ordered mine from Dobles via Ebay £8.97 delivered for the full 4 part kit just unsure how it fits to the rear M/C, I will work it out and it will look better with the Gilles rearsets as well. You happier with them off the bike now must be a more relaxing position I set the RCS to 18 this morning....lets say its more track focused, more on and off, its not bad and I quite like it, but prefer the 20 on the road, but next trackday the 18 is getting dialed in Sorry to hear you are being dicked around, I would say its not usual from Jonny.... But !
Think I will order the Dobles one as well. Yeah - i much prefer the stock pegs. The 18 ratio sounds quite aggressive! And the last thing mate - IVE JUST ORDERED THE BREMBO CLUTCH LEVER AND PERTCH TOO! Looks like i will be selling my nice shiney black ASV levers soon!
I got it from Harris - £125+VAT Cant see it on the Carpimoto. I asked them and they sent me a link to the lever only. It could be the complete thing as it is €160, but it isnt clear.
Its my birthday in a couple of weeks! Well Jamie, i have a gopro hero 2 already and i will have my RCS and clutch levers in the next few days - get them both I say!
Mate have you ordered a banjo switch for the brake light it as it won't retain the original switch, you have to buy a brembo specific one as the thread is finer mine was about £25 bloody expensive but a must have!!!
The RCS comes with a brake light switch built in! It also comes with the double banjo. I know this cause Jamie purchased from the same place.
Ohhhhhh I see my RCS was already fitted, but my older model brembo on my road bike didn't come with it so I assumed these wouldnt either thats a result!!!
Thats right Benn, only the RCS comes with the switch. The fixed 19x20 doesn't. This is true of the place we purchased from anyway.
The brake switch is not built in, you can click it into place on the lever if you require it, but once fitted it looks like it is built in (if that makes sense). I had some of the small spade connectors from halfrauds kicking about so crimped them to the brembo switch wires then plugged them into the OE connectors and wrapped with self sealing tape, so the OE could be fitted without any hassle
Hi Steve Got the same set up on mine , with the brembo res kit The overall length of the bracket is 110mm , it is 18mm in width going slighty larger in to cicular end where the res fastens on , it is 2mm in thickness I have attached photos to help
