Separate names with a comma.
Well, going to give the pro 4 a go. As you say if I don't like it I can always go back. Any advise on where to buy it. Got my genuine oil filter...
Hello all, I have a 2009 repsol 1000rr. Had it 2 years now. I done last oil change and used motul 5100 10/40 as I used it previous R1 and was...
Hello Jim. I see you have a PC5 map for race fit exhaust. Any chance you could send it to me. I have a RR9 with Arrow GP2 exhaust and it runs poor...
hello all. Due yearly oil change. I normally use motul semi 5100 10/40. Used this in previous R1 and last year in 2009 rr9. Bike has 9k on it. 6k...
M7's it is then. Yeah already got a 55 rear. Wheres the cheapest place for tires??
Hello there, Need new tires for my RR9. Currently have Pirelli Rosso II fitted. Seen good reviews on Metzeler M7RR last year. Just wondering on...
Ok Thanks. Do you have an o2 eliminator fitted?
Do you remember which map code it is there are a couple of different ones. Is yours smooth at around 2 - 2.5 k revs??
Hello there. Would not mind a copy of arrow gp map if that's ok. I have a map on mine from dj but if not very smooth at low rpm.
Will try to look at condition of chain sprocket and Cush drive. Only 8000 miles on bike. If I need new chain and sprockets do you recommend oem...
Since I bought my rr9 last year at low speed I get a click when opening and closing throttle. When previously posted about it it seems normal but...
if you pm me your mobile number i will send you 1 off the wifes phone
have a scorpion can with removeable baffle if interested?
I am sure if you could get some thin metal it could be screwed rather than welded.
I fitted the infill panel off my scorpion exhaust. I welded 2 bits of thin aluminium into a t shape. Bent them so it fitted to bolt under engine...
I got told not to use fully synthetic in my 08 R1 if only used on roads? I would like to use what ever is best for it. The only thing I dont...
Hello all, I am sure this has been covered many times but is Motul 5100 10/40 ok for my 1000rr rr9?? Used to use in my R1.
I have an arrow GP2. I took the foil gasket out of std can and fitted it into link pipe. Pushed onto header then all kept in place with spring. I...
Anyone??
I have a RR9 Repsol. Going to fit a Motografix number board on the front but seem to have a gap at the front under screen when I line up letters...
