Separate names with a comma.
The RCS adjuster changes the distance from the lever pivot bolt to the plunger, like so: [IMG] The 18mm setting takes less force and more lever...
Waved a rule at my RR5 to get you some numbers. Lever end travel with the RCS and braided lines is 30mm with the 20mm pivot length and 35mm with...
lol, so now I own the19mm cone wrench that'll probably never be used. :) Looked at the fork top this morning and thought I'd need it to hold the...
Dropped a fork leg out to replace a seal that blew a few weeks ago. Got lucky at my local cycle shop who had a 19mm cone wrench in their...
Presumably the other four were out of tolerance so the shafts had to come out anyway. Might as well do the ones that are getting close at the...
Damn, sorry! - just realised how badly that was worded. :oops: Didn't do 1000 miles yesterday morning. Just clicked the trip over 1000 from...
The other couple of longish runs so far were Oban via Inverary and a spin down to Cumbria. Both trips dry out then absolutely torrential back....
Made a mistake in the order of that description. :oops: Have edited it to show that marking the length comes after screwing in the handle to set...
Clicked over 1000 miles on the blade this morning. :) Liking it a lot. Has it's quirks(clunky, snatchy and hot in town) but man - what an a-road...
Isn't hard to calibrate them yourself. I picked up a cheap ΒΌ" 5-25 off ebay that didn't come with a ticket so I wanted to check it before use....
MOT'd and first ride out. Happy Days! :) [IMG] [IMG]
Replacement bodywork fitted and lining up not too bad at all. Need to have another crack at the inner cowls round the radiator. ...and the...
This was my first bucket and shim job so I wasn't exactly comfortable to begin with either. :) Have done other clearances though(screw and...
Fired 'er up for the first time yesterday. :) On the first turn of the key the dash was blank. Took off the screen and checked the dash...
Mickey asked for some clarification of the size checking so thought I'd copy the reply here because: a) Other folk may be curious. b) I'm no...
Was glad to find the 04-05 Blade manual as a download. Got a paper copy with the bike but I hate getting manuals dirty. Obviously it happens and...
I blame that Marshall Cavendish "Road Bike" series back in the eighties. After they showed Honda owners how to change their own rectifiers the...
There still seem to be about as many workshops around these days(or around here anyway) as pre-internet. Not really an answer to the question but...
Just thought I'd add a link to the exploded view that was handy when my "which bolts go where" notes didn't make as much sense as they had the day...
With Rossi and Stoner I got the impression that they'd changed to a bike that suited them more than the previous one had, so their next title...
