Separate names with a comma.
Ash, dirt and powder from the extinguisher is everywhere... I am getting a bit concerned how all of this will clean up. [ATTACH] [ATTACH]
Throttle body removed, intake ports plugged with rags and getting ready to take out the main wiring harness. Found this sensor just hanging like...
Thanks guys. It is nothing scary really I did pretty much the same thing a few years ago with my old 900 blade. It was just a maintenance winter...
Airbox removed. Throttle bodies look okay-ish inside, injectors and fuel rail look fine. We shall see if the TB assembly can be cleaned and reused...
A few more pictures of the general condition the bike was in. The left frame slider and carbon case cover took most of the damage and saved the...
Thanks mate. Project is moving along nicely and the bike is taking shape. I just want to take you through everything from the beginning.
ECU unplugged. It is a bit soothy on the outside, but considering it is enclosed in resin, should be fine. We'll see. [ATTACH]
Taking off the clutch side button assembly. Right clip-on was broken, so I just cut it off the wires and throttle cables. Main harness unplugged...
A few more pictures of the initial state. Most of what you see is sooth, extinguisher powder and corrosion (I will get to that later). At this...
Hi folks, As I mentioned in my introduction post - I recently decided to build a track only bike and picked up a friend's crashed 08. The crash...
The only logical explanation for forks to develop free play (assuming they have not been crashed, bent, etc.) is if the top bushing (with the...
Hi mate, would like to take both screens off your hands. PM me.
Thanks guys, will be in touch with vic_ster51 :) Will start the rebuild thread later tonight, hopefully it will be an interesting thing to see.
Hi folks, New member, first post. Been around Hondas for ~15 years, still have my first 900RR streetfightered. Anyways, I am doing a full...
