Separate names with a comma.
fitted a pyraming as well in 2008! you have to be carefull with the clearances as there is not much there!
no need to change the rectifier. The bike puts out abot 14.5V which is perfect for charging LFP batteries. BMS is a must. If you buy one without...
how about stainless steel cleaner used for pans? any form of rubbing will put a shine on. maybe you can finish it with light touch of scouring pad...
unfortunately no matter which way you go, you'll be hit with road closures, road works and day dreaming idiots. Stick with M40/ A40 and once in...
I also put some protective film on the center section where the boot rubs If you polish or blast it, put a protective lacker on first ditech: I...
record & watch some of the episode that sound interesting. The recent one in russia was so realistic; it was like riding here: bad roads, bad...
Good to hear of a happy ending :) I’m a little puzzled why the o2 fault did not activate the engine check light. Normally the heater circuit goes...
Unfortunately I don’t have the exact bike; unless the generator is driven off the flywheel and the latter has been reduced in diameter, I can...
definitely! IN fact if it is AGM and activated, then once every month or two even when sitting on the shelf. LPF's normall come 60% precharged but...
does the silencer bolt goes through a rubber washer? or you can try one
I had the same experience few years ago. Contacted my honda mechanic after recovering from the shock. He said done properly, jacking up like that...
You should be able to buy them yourself but make sure it is a genuine denso (or ngk?) by checking the model part on their website. You most...
very good analysis. I feel some riders (wrongly) think of running super low pressures because that's what they do when racing without...
I think it is a montage. I can't beleive the roads are so so so smooth; like a race track and the perceived speed differential compared with other...
the check light comes on if the motor (or solenoid in your case) is unplugged. Some people disconnect the link between it and the actual valve to...
Check your manual; I expect to see 14V at idle, up to 14.5 @ high rpm. Poor you; if you have an LFP battery. From what I have read, they need 14v+...
On my RR8, the valve in the silencer is driven by an electric motor (via a cable) not a solenoid. They must have changed the design. If yours is...
hopefuly is a simple case of defective spark plugs. interested to know to cause . Popcorn time:)
OIC this explains it even more. What a bunch of w’kers:rolleyes:
Thanks lozzy you r a star My Humax recorder on line TV guide shows it as 19:00. :mad: Fuc’ing irritating! Checked the device EPG, same as you....
