Separate names with a comma.
That's how I have always done it. Whether it was done this way when head bearings done is another matter... regardless I still had the same...
Bennetts ATM for past two years. Pretty good so far.
You mean float in the up / down movement surely? I.e. the calipers can be raised / lowered by 1-2mm with the bolts loose. I generally just push...
The discs have only had Brembo pads used. Thanks - didn't think that would be aggressive enough hence was looking for red scotch brite?
Didn't get time last night... I'm stripping it down tonight as off work tomorrow. Plan is to Scotch-Brite the discs (trying to find some!) and...
Changed mine in 20 minutes, then spent another 20 mins cleaning the linkages and bearings whilst at it ... its really simple.
Just bought a dial indicator!
[IMG] [IMG] Excuse state of bike. It's not been touched since track day and over 600 miles :D
Bobbins just about rotate but very stiff ... can't see any heat spots on the discs no. Will post a picture.
:D I'm doing more track work so considering it again!!! :D :D :D
Thanks will check... picking up scotchbrite and brake cleaner tonight to clean them up.
Possibly due to brake pads bedding in again? After disturbance? Won't a disc issue with variable DTV cause pulsing at lever? I don't get any...
Worth doing?
Are the bobbins supposed to rotate on the Brembo ORO discs does anyone know?
I'm 99% sure ... as would have noticed. Calipers have been off a few times but will double check tonight!
I don't unfortunately. These are the discs: https://www.1000rr.co.uk/threads/brembo-oro-discs-320-mm.32190/ I sold my OE discs :( Brembo M4's...
New head bearings resolved the issue for about 40-50 miles ... now its back again. I expect disturbing the brakes / alignment was enough to reduce...
Yes they are ... the brake buttons are cleaned every wash. They are Brembo ORO discs if that makes any difference which I think are full floating?...
Track day today ... the issue is worse than ever. What the heck is going on. Getting annoyed with it now. Even better I sold my spare brake...
I've used the Michelins (RS), Pirellis (DR3s) and Metzlers (M7RR's) all on the blade covering in total over 25,000 miles. In order of preference:...
