Separate names with a comma.
Hello folks, not been hear for ages After a 3 year lay off I have started trying to get the blade back on the road The bike stood outside under a...
Got a set of Dunlop 211gp racers enduro rear medium front Been well pleased with these as track tyres and have had 6/7 track days out of them on...
I have been trying to fit some gilles adjustable rearsets and have found that with a HM+ quickshifter the gear arm linkage is about 20mm too long...
my 2009 blade has a full Arrow 'trophy' race system. (the one with prism shaped end can) End on it looks like a curved edged triangle with an oval...
How do folks, not been on for ages , hope you are all well:) I'm after some rear sets for my 2009 model blade which has a hm plus quickshifter. My...
My HM+ shifter has been causing me some greif on the road its fine but last 2 track days it has started to behave very erratically. But only after...
After fitting new goodridge stainless lines and new fluid, cleaning the disks and scouring the pads the brakes are a little less sharp and the...
Well I've finally got to test the full k-tech set up I've invested in over winter K-tech fork springs valves and seals etc and a 35DDs pro rear...
Would some kind soul please give me the torque settings for the bolts that hold the rear shock to the linkage, (fitting my new k-tech tommorow)....
Just bought myself a K-Tech 35DDS Pro rear shock:D So this winters mods have been new break lines /pads K-tech fork innards Ktech Rear shock....
Have got the chance to go to Halifax novo scotia in June, due to wifes work, and am thinking of doing a bike tour for 1 week to 10 days. Plan to...
While carrying out the post crimbo rubbish the corner of a cardboard box caught the fairing just above and infront of where ya left hand grabs the...
I'm in the market for a new rear shock for my rr8, for road and regular trackday use and IOM trips, I like to be able to set the bike up for...
Put a HRC 1/6th turn throttle tube on.:eek: Chuffin eck what a difference, its a bit flighty and takes some getting used to but shit the bed its...
While recently fitting my new head light units (RR8) I had a good root around in the end of the ram air tubes in the side fairings (which also...
Cant get my computer to download the manual so I wondered if someone would be so kind as to give me the torque settings for 1. Fork yoke upper...
Finally get the bike back on the road after 2 weeks of suspension, brake and general overhaul. 1st ride and a stone flicks up at speed and cracks...
Just pulled out the air filter on my rr8 and there was a fair bit of oil (no puddles but still a fair stain covering half the box floor) that had...
Took the fairings off the bike in the dark and seem to have lost some rather important spacers. I have R&G crash bungs on a 2008 blade Am i...
Alpine Dash unit CDA.7850R radio and flip front cd with 40 watt rms per channel with surround and cradle (removable front) Alpine 6 cd...
