Separate names with a comma.
But if the pin is flopping about inside the headstock the angle of the stand will be altered! This is Colin's bike on the headstock stand with a...
You could try an see if one of the seller on eBay that do headstock tool or engine/swing arm removal tools could make up a 23mm adaptor for you?...
Not if you get the correct sized pin made up, then there is no issues with the fairings! :)
21mm pin is a no go check this thread out from back in 2012 about same topic!
23mm is the size we measured up for the adaptor Col.
Well that's one term for it Jimbo! :D
Never know ur luck might be changing for the better! :D
Can only imagine the concentration on the eyes behind that tinted visor! :D Some nice shots there, some pretty different looks from from each...
If your loom is soldered and the continuity is good down each of the previously damaged wires you shouldnt need to swap out the loom as its doing...
Jase, how was the loom repaired? Soldered joints? Just twisted wires? Blue scotch locks? Crimp connections? If your loom is soldered...
Guys when I had told jase to bypass the tilt switch it was for diagnostic purposes to either rule it out or confirm its the cause of his issue!...
Is the cam sensor pickup not on the top of the rocker cover on the 08+ models, between spark plug 2 n 3 towards the lower end?
That's quite a pack heading for turn 1! ;)
Looking at the schedule its the endurance race lasting 3 hours that spaces the races out quite a bit! :)
Not got a windoze tablet myself but if its running a standard version of windows and has a USB port cant see why it shouldn't work. :)
Trev, bit of a silly question but have you actually asked for a shot on someone else's bike??? Don't ask don't get an all that! ;)
Wedgie, jay is listed in the amended non qualifying section in race 5! I had heard they were having issues again with jays bike cutting out and...
Yeah you have you lying git!!!! ;) There is photographic evidence an you even got a certificate to say how well you done on said abs equipped...
I would expect dust, dirt and other crap to get stuck behind the gators n like sw said scratch the crap out of the wheels anyway makin them look...
So am I missing something or going by the eBay listing the dude that bought it off YT is a trader and bought it off YT with sole purpose of...
