Guys i want to bring my 2013 blade over to the UK and get in dyno'd. Currently has a pc5 with r77 end can, baffle in. Nothing else. It just hangs onto the revs as I throttle off so i suspect it needs to have its fuelling adjusted. currently only have 400 miles on the clock. How many miles should i put on it before its thrashed on the rolling road? can anyone recommend somewhere near portsmouth/weymouth within 1 hours ride where i can get a great job done on the machine. Looks like summer is around the corner
Dynotech in Tadley, Basingstoke are very good and is the place to go round here very offten talked about and about 40 mins from Portsmouth if that helps
Hampshire bike and quad in Waterlooville, Portsmouth have a Dyno and did my map for me. Lovely and smooth.
Cheers guys. Will have a look at them all on the big map to see where they all are.villan what mods are you running with and before dyno did you get any hanging on the revs off throttle when you were about to brake as I get that on mine with the recommended pc5 map.
Paul, I'd have waited till you'd had your first service at around 600 miles, tiz at this point you can cain it with confidence. Toddling over too Ireland in 3 weeks for a 5 day mini-tour with the lads, having two nights in Cork so we can get leathered! There is a good Dyno Centre warrington way that specialises in fitting PC's and Can's, Si had his bike done there I believe, can't remember the name now, Si? It would be an easy trip to warrington from Ireland, straight off the Ferry at Holyhead and waz down the A55 to warrington, you might even do it in a day, Ferry times permitting although I'd make it a two dayer with a B&B
Thanks, I think I may try crescent in Verwood? As its not too far off the ferry from jersey to the Bournemouth area. But thanks for recommendation . Weather should be decidedly tropical for u guys by then !
