Wanted for a 2011 Blade at less than the £55 that ebay seller wants inc delivery. I am sure there is a way to make one of these but i want something easy, sealed and reliable.
This should do the trick Healtech Exhaust Servo Eliminator Call me on Monday if you want one, there's a forum discount
For what it is, £30 or more is an absolute con... its essentially a couple of resistors and a capacitor... someone posted the circuit diagram on here the other day... the only tricky bit is getting hold of the correct plug but thats not essential unless you're really fussy. I suspect one could be made and encased in silicon for little more than a quid.
Here is the post with the diagram: http://1000rr.co.uk/mods-upgrades-accessories-products/13272-68.htm I understand (although I could be wrong) that all 600RR and 1000RR models with servo-actuated exhaust valves have the exact same motor, and therefore the the above circuit will do the job.
Kickboxer.. you can make these things with a few items from Maplin Electronics like I made for Lambchops (as the link above). Total spend is about £1.90, but if your not keen on soldering wires etc, best bet is to go for the servo Eliminator from the guys above.. easy plug and play Have you still got the Servo motor? really straight forward to cut the plug off the motor side and solder this in, then a little shrink wrap over the top
Gabby, that setup from the diagram in that thread won't work on 08+ blades as they changed the responses the ECU is looking for and its use will throw up the Fi light on the dash!
Anyone got a diagram for one that will work on a 2011 Blade. Still got the motor, it's still in the bike doing no harm as the cables are disconnected. I only want to remove it to make space for a power commander.
