Upper Engine Hanger bolt: Advice

To enable me to fit the 1JAC hanger I need to remove the upper engine hanger nut, will I need a Honda Locking Nut Wrench to re-tighten the nut or will the locking nut on the other end of the bolt hold in place whilst I remove and replace the nut?

I hope that make sense

 

if its the same as the warrior no special tools are needed. The right hand lock nut keeps everything in place so the left can be removed using a normal socket

 

Thanks slick that exactly what I needed to know

 

you may need a high tech adjustable shifter to put the 1-Jac 'nut' on. Its a funny size - around 21mm from memory and I didnt have the spanner.. so used the shifter

 

Can you remind of the thread for that nut please?

 

I dont know it Peter I'm afraid.. but you simply take off the upper nut from the Bike and screw on the 1-jac nut/adapter..

 

Ok no problem I will check on mine,