GPR slip on

Discussion in 'Parts, Accessories & Clothing' started by Kingfixer, Jun 23, 2015.

  1. Kingfixer

    Kingfixer New Member

    Joined:
    May 18, 2014
    Messages:
    175
    Likes Received:
    73
    this was on the bike when I got it last year, the curve of the link pipe touches the race fairing, so I have now got an AR can which works better as it has a straight link pipe.
    A couple of scratches on the end cap that you can hopefully see in the pics, , you will need a new clamp as the bolt sheared off while trying to get it removed !. The springs are not the same either, overall though in very good condition, also has the end baffle with circlip
    £150 inc postage. This off my 08 blade.
    image.jpg
    image.jpg
    image.jpg image.jpg
     
  2. sps170373

    sps170373 Moderator
    Staff Member

    Joined:
    May 24, 2013
    Messages:
    7,860
    Likes Received:
    3,093
    What diameter is the link pipe that goes into the end can please or diameter of the inlet? Thanks
     
  3. Kingfixer

    Kingfixer New Member

    Joined:
    May 18, 2014
    Messages:
    175
    Likes Received:
    73
    54mm at can end 50mm at the other end
    image.jpg image.jpg
     
  4. jack

    jack Active Member

    Joined:
    Nov 9, 2014
    Messages:
    167
    Likes Received:
    20
    £100 and can pay now?
     

Share This Page