SATO Street Hooks Group Buy

Discussion in 'Mods, Upgrades, Accessories and Products' started by Sam Bird, Sep 28, 2015.

Page 2 of 4
  1. bash1k

    bash1k Active Member

    Joined:
    Sep 29, 2014
    Messages:
    525
    Likes Received:
    93
    Cheers mate
     
    #21 bash1k, Oct 2, 2015
  2. exuptoy

    exuptoy Elite Member

    Joined:
    Feb 24, 2015
    Messages:
    2,781
    Likes Received:
    1,147
    84mm it is mate. If you want a set I'll see uf he can modify a set.
    Let me know.
     
    #22 exuptoy, Oct 2, 2015
  3. bash1k

    bash1k Active Member

    Joined:
    Sep 29, 2014
    Messages:
    525
    Likes Received:
    93
    Mate sounds good. If he can do it I'll have them. appreciate it if it's possible but don't sweat it if not
     
    #23 bash1k, Oct 2, 2015
  4. exuptoy

    exuptoy Elite Member

    Joined:
    Feb 24, 2015
    Messages:
    2,781
    Likes Received:
    1,147
    Right, I'v spoken to Daz and he will make up 2 sets for @Sam Bird and Bash next weekend as he is flat out this week.

    70mm centre for the top mounts is not an issue @bash1k just please verify before he starts making them. Do you need the 70mm centred on the plate as in 35mm from the centre line or does it not matter a this is probably what will be done otherwise?

    Pics of the finished article once they're complete and ready to post.
     
    #24 exuptoy, Oct 3, 2015
  5. bash1k

    bash1k Active Member

    Joined:
    Sep 29, 2014
    Messages:
    525
    Likes Received:
    93
    To be honest I can't see it being an issue either way, but yes my preference is to have them centred, so 35mm from centre for each hole. Could the bolt holes be drilled to 6mm please mate? Sorry, I know mine are turning into even more bespoke item! Is that ok?
     
    #25 bash1k, Oct 3, 2015
  6. exuptoy

    exuptoy Elite Member

    Joined:
    Feb 24, 2015
    Messages:
    2,781
    Likes Received:
    1,147
    That'll be fine. You using them for pillion pegs of just the tie down?
     
    #26 exuptoy, Oct 3, 2015
  7. bash1k

    bash1k Active Member

    Joined:
    Sep 29, 2014
    Messages:
    525
    Likes Received:
    93
    Just pm'd bud
     
    #27 bash1k, Oct 3, 2015
  8. Sam Bird

    Sam Bird New Member

    Joined:
    Jun 10, 2015
    Messages:
    350
    Likes Received:
    78
    Wicked, cant wait. Can my ones just be standard like the SATO ones please? So that I can have them for refit/removal of my rear pegs
     
    #28 Sam Bird, Oct 7, 2015
  9. exuptoy

    exuptoy Elite Member

    Joined:
    Feb 24, 2015
    Messages:
    2,781
    Likes Received:
    1,147
    No problem mate. He did the CAD work tonight for the modified ones to fit the Motoholders subframe so those with a track bike can have a tie down point. He's gonna be machining them out on the weekend all being well.
     
    #29 exuptoy, Oct 7, 2015
  10. Sam Bird

    Sam Bird New Member

    Joined:
    Jun 10, 2015
    Messages:
    350
    Likes Received:
    78
    Nice one, just let me know when and how to make payment :)

    Will they be painted or just bare metal? i have a Silver Subframe so would prefer them to match so bare metal will be fine
     
    #30 Sam Bird, Oct 8, 2015
  11. exuptoy

    exuptoy Elite Member

    Joined:
    Feb 24, 2015
    Messages:
    2,781
    Likes Received:
    1,147
    Plain alloy silver mate.
     
    #31 exuptoy, Oct 8, 2015
  12. Sam Bird

    Sam Bird New Member

    Joined:
    Jun 10, 2015
    Messages:
    350
    Likes Received:
    78
    Spot on :)
     
    #32 Sam Bird, Oct 8, 2015
  13. lardytkd

    lardytkd Active Member

    Joined:
    Apr 4, 2015
    Messages:
    232
    Likes Received:
    141
    What years are these being made for. I'm after aa set for an 06 model.
     
    #33 lardytkd, Oct 13, 2015
  14. exuptoy

    exuptoy Elite Member

    Joined:
    Feb 24, 2015
    Messages:
    2,781
    Likes Received:
    1,147
    He only has dimensions of 08 on non ABS. If you can borrow a set he can replicate them though and send them back once dimensions have been taken.
     
    #34 exuptoy, Oct 13, 2015
  15. callumw

    callumw Active Member

    Joined:
    Aug 19, 2012
    Messages:
    765
    Likes Received:
    249
    I'm in for a set too. Perfect if they're silver to go with my frame ....
     
    #35 callumw, Oct 23, 2015
  16. markie*mark0

    markie*mark0 Active Member

    Joined:
    Jul 23, 2013
    Messages:
    142
    Likes Received:
    35
    any one used these for ratcheting the bike down to a trailer?
     
    #36 markie*mark0, Oct 23, 2015
  17. Moon

    Moon Active Member

    Joined:
    Aug 9, 2014
    Messages:
    433
    Likes Received:
    102
    I have the Sato hooks, the front wheel goes in a chock and I use 2 ratchet straps one each side from the Sato hook to an anchor point on the floor, job done! Great bit of kit. Quick easy and safe
     
    #37 Moon, Oct 23, 2015
  18. markie*mark0

    markie*mark0 Active Member

    Joined:
    Jul 23, 2013
    Messages:
    142
    Likes Received:
    35
    cool, looks like i know what santa is getting me !
     
    #38 markie*mark0, Oct 23, 2015
  19. exuptoy

    exuptoy Elite Member

    Joined:
    Feb 24, 2015
    Messages:
    2,781
    Likes Received:
    1,147
    No worries mate, I've sent him a PM. I think the set he was making for @Sam Bird should be winging their way to him now. I sent him a pic on Monday of the quality of the kit. They are nice in machined alloy!

    Try and get the pic up if you can Sam. I'm offshore and don't have access to my pics.
     
    #39 exuptoy, Oct 23, 2015
    • Like Like x 1
  20. Sam Bird

    Sam Bird New Member

    Joined:
    Jun 10, 2015
    Messages:
    350
    Likes Received:
    78
    Im away with work till Thursday so wont be getting them till next weekend now and when I get them I am going to spray them to colour match the frame, so probably going to be a couple of weeks before they are fitted
     
    #40 Sam Bird, Oct 24, 2015
Page 2 of 4

Share This Page