Exhaust recommendations for track days

Discussion in 'Trackdays' started by Glenn2605, Oct 23, 2016.

  1. Glenn2605

    Glenn2605 Active Member

    Joined:
    Jan 10, 2016
    Messages:
    54
    Likes Received:
    1
    Hi All,

    As in the title I'm waiting to find out what exhausts people are running for track days, I tried to get on at Castle Combe this year with the standard can and it failed the noise test - I have a 2010 blade.

    Cheers,
    Glenn
     
  2. sps170373

    sps170373 Moderator
    Staff Member

    Joined:
    May 24, 2013
    Messages:
    7,860
    Likes Received:
    3,093
    If you failed with the standard can there I don't think any aftermarket exhaust is gonna pass to be honest at castle Combe
     
  3. ColinBR

    ColinBR God Like

    Joined:
    Oct 8, 2011
    Messages:
    6,442
    Likes Received:
    3,236
    MHP exhausts are about as good as you can get for getting the noise levels down
     
  4. Glenn2605

    Glenn2605 Active Member

    Joined:
    Jan 10, 2016
    Messages:
    54
    Likes Received:
    1
    This is teh feedback I've had from others as well, I have a winter to work on it so fingers crossed..
     
  5. oldbutgold

    oldbutgold New Member

    Joined:
    Oct 25, 2015
    Messages:
    57
    Likes Received:
    4
    Colin is right . Mhp got my arrow system down from 109db to 99db. Very nice work too
     
    • Useful Useful x 1
  6. Glenn2605

    Glenn2605 Active Member

    Joined:
    Jan 10, 2016
    Messages:
    54
    Likes Received:
    1
    Which arrow system do you have out of interest?
     
  7. oldbutgold

    oldbutgold New Member

    Joined:
    Oct 25, 2015
    Messages:
    57
    Likes Received:
    4
    it's an earlier race system originally supplied by Padgetts.
    It uses the trophy 48mm slip on silencer.
     
  8. Glenn2605

    Glenn2605 Active Member

    Joined:
    Jan 10, 2016
    Messages:
    54
    Likes Received:
    1
    Any thoughts on a full Leo Vince SBK system?
     
  9. racman

    racman Active Member

    Joined:
    Jan 19, 2013
    Messages:
    408
    Likes Received:
    96
    on the same subject, has anyone done a trackday with the scorpion serket taper end can. i had mine noise tested at cadwell today. it blew at 110db. but the bike had only been run at idle for 10 mins before the test. i presume if i had ragged it a bit before the test it may have blown a little lower.

    i have spoke to scorpion who have a db killer available but advise would only normally reduce this reading by 3-4 db
     
  10. Scott

    Scott Active Member

    Joined:
    Jun 11, 2013
    Messages:
    2,747
    Likes Received:
    448
    Will never make it low enough
     

Share This Page