HRC Rear Brake Resevoir

Who's got these type of rear brake reservoirs fitted? Can you share some pictures please?

I've got this fitted at the moment which was on it when I bought the bike recently. It seems redicolously long to me. I was looking at making it shorter but the direction it comes out of the master cylinder would mean it will be pointing forwards rather than upwards.

Interested to see what/how others are.

 

The usual thing is to cut them short, although mine is an RR6 where the pipe is pretty much vertical.

 

They defo look a lot better shorter. The problem is the angle they come out of the MC. @Dave dunlop Is yours just resting on the frame there? Does it stay it that position?

 

The angle on the stock reservoir bugged me so found the spares that allow a straight swap

 

Is that a 90 bend? Can you remember where you got it from?

 

yes it is

 

P/N 43503-KS6-701
P/N 43517-KS6-701

From any Honda dealer mate

 

Nice one thanks

 

Yeh just straight on the frame with a tiny blob of silicon behind to hold it I place otherwise it tries disappearing behind the subframe.

The answer is the 90 degree one that Si has...

 

I'm waiting for one of these to appear sometime soon

 

Going to need deep pockets to buy a new one! Mega bucks... just waiting for a used one to spring up

 

Just under 2K new!!!!!!

But this ones slightly cheaper at £1300!!!!

 

Depends where you buy it from:-

https://www.carpimoto.it/en-GB/Brak...Brake-Master-Cylinder-13mm-with-Reservoir.htm

I had to remake the footrest as hole spacing is different.

 

That's super cheap!! ... Do you know what size bore and stroke the OE unit is? I quite fancy going down the thumb brake route...