Hi all I'm new to the forum and own a 2010 cbr1000rra but having problem with it at moment and be grateful for any help. My bike is cutting out for no apparent reason, no warning signs just goes dead while riding or waiting at lights. Tends to do it after approx 20miles. Will start up straight away if I flick kill switch on then off again but engine won't turn over if I leave kill switch alone and try starting it. Has anyone had a similar problem who can help me. Seems to me its to do with kill switch but could b barking up wrong tree!!!!!!
Could be the map sensor circuit! I had a similar problem recently but fortunately I have a different dash which tells me the error! You need to see what error pattern you're getting on the red warning light
Sound like a relay fault, if the coil cannot hold the contacts closed, by recycling the kill switch it is getting reset, I would not have thought that an engine sensor would inhibit the starter, as the kill switch will stop the fuel pump a faulty relay would cause the cut out.
Cheers mate. No joy yet sick to death of it checked battery and relays changing kill switch tomorrow then gonna try again! Failing that I have a crank sensor ordered so will try that nxt... totally at a loss!!! Spoke to technician at Newcastle motorcycles who hadn't heard of this fault before and fact no fault codes showing on diagnostic makes it even more difficult!!!!!
My blade is in the garage at the minute. Similar problem cutting out then starting back up then last week cut out for good having new reg/rec fitted today hopefully everything sorted
fingers crossed it gets sorted mate let me know if it does, might b similar problem with mine!!!! Does your just die without warning, everything shut down ? Mine does with no loss of power or spluttering just dies on spot all power goes instantly!!!!!!! Can fire up straight away though if I flick kill switch on then back off !!!
All the lights on the dash came on then it died, Just heard from garage all done ready for collection it was the regulator/rectifier £142 well happy
Well bike still not working!!! Picked up from garage today and ride approx 1 mile just for bike to suddenly lose all power and cut out. Engine management light and hiss lights flashing simultaneously and wouldn't start again!!!!! Got back to garage and bloke took bike out for blast and did it again!!! Sudden loss of speed and power then suddenly picked up again !!! At a loss totally just throwing money down the toilet!!!! No fault code showing on dyno!!!! Any ideas anyone?????? Bike is a 2010 cbr1000
