Racefit Infill fitted with the new Akra

Discussion in 'Mods, Upgrades, Accessories and Products' started by iang27, Apr 26, 2016.

  1. Mike Wallis

    Mike Wallis New Member

    Joined:
    Mar 2, 2020
    Messages:
    1
    Likes Received:
    6
    Hi buddy!

    I just wanted to say thanks for this original thread. I stumbled on it a month ago, saw the great job with the racefit infill, and did it myself!
    Once I'd chopped a bit of the carbon off around the pipe, I thought I'd try my hand at applying some 3M vinyl so the graphics followed on nicely. I think it's turned out pretty well!

    Next step to fit the battery and start her up! It'll be interesting what this new exhaust sounds like!

    Many thanks
    Mike

    IMG_9998.jpg
     
    • Like Like x 6
  2. Mr_Chin_LK

    Mr_Chin_LK Well-Known Member

    Joined:
    Mar 19, 2020
    Messages:
    512
    Likes Received:
    489
    That looks lush Mike, great job there!

    I'd be inclined to add more of the white decals along the bottom black section of the belly to make it even more uniform, but that's just my opinion.

    Chin
     
    • Agree Agree x 2
  3. DangerMouseUK

    DangerMouseUK New Member

    Joined:
    Apr 28, 2020
    Messages:
    47
    Likes Received:
    33
    Presumably you'd have to cut away a lot more if you wanted to use the older Akrapovic slip-on?

    Looks like this is the best infill panel on the market though so might just have to pull the trigger on it.
     
    • Like Like x 1
  4. 7belowzero

    7belowzero Active Member

    Joined:
    Nov 26, 2018
    Messages:
    49
    Likes Received:
    62
    Finished mine today. Really pleased with it and just 15 mins with the Dremel

    [​IMG]
     
    • Like Like x 5
  5. tuktuk

    tuktuk Elite Member

    Joined:
    Dec 2, 2015
    Messages:
    2,011
    Likes Received:
    1,320
    Is this the racefit one? I'm looking at doing the same with mine as it will need trimming etc.
     
  6. 7belowzero

    7belowzero Active Member

    Joined:
    Nov 26, 2018
    Messages:
    49
    Likes Received:
    62
    Hi there, yes it's the racefit one. £120 with the postage. Really easy to cut and sand with the dremel. Originally I cut the gap to 5mm but thought it was a little too close, so, I opened it up to 10mm. Hope this helps?
     
    • Like Like x 1
  7. tuktuk

    tuktuk Elite Member

    Joined:
    Dec 2, 2015
    Messages:
    2,011
    Likes Received:
    1,320
    Thanks mate. Definitely the one I will go for.

    Out of interest, looking at this pic, how much material would you say I will be removing? I think I will have to trim it back a little more than you have but I'm worried about if I'd be going into the area of any fixings etc?

    20190820_201836-2016x1512.jpg
     
  8. 7belowzero

    7belowzero Active Member

    Joined:
    Nov 26, 2018
    Messages:
    49
    Likes Received:
    62
    I think yours looks OK as it is. However, yes you would have to cut a fair bit off. The mounting bracket is right at the bottom, so, you should be OK to cut quite a fair amount off. With a bit of work, it would look great cut around the Akro heel guard.
     
    • Like Like x 1
  9. tuktuk

    tuktuk Elite Member

    Joined:
    Dec 2, 2015
    Messages:
    2,011
    Likes Received:
    1,320
    Cheers! Shopping list is never complete lol.
     
    • Funny Funny x 1
  10. DangerMouseUK

    DangerMouseUK New Member

    Joined:
    Apr 28, 2020
    Messages:
    47
    Likes Received:
    33
    Do you think the older slipon pipework would fit under the panel?;

    2ca599080f8c4719976bfb6dbb98f8a9.png
    Or am I going to have to use that as an excuse to go for the full system?
     
  11. 7belowzero

    7belowzero Active Member

    Joined:
    Nov 26, 2018
    Messages:
    49
    Likes Received:
    62
    Not really sure to be honest, but I think it may be a struggle. Maybe someone on here will know a bit more???
     
    #31 7belowzero, May 14, 2020
    Last edited: May 14, 2020
    • Like Like x 1
  12. LRJimmy

    LRJimmy Active Member

    Joined:
    Sep 4, 2019
    Messages:
    1,753
    Likes Received:
    696
    Nope, don’t think so. I have the S bend type and it sits lower than the belly pan so you would only benefit being able to extend the side a tiny proportion. Most of the panel would need cut away....Ive already binned this idea :)
     
    • Like Like x 2
  13. DangerMouseUK

    DangerMouseUK New Member

    Joined:
    Apr 28, 2020
    Messages:
    47
    Likes Received:
    33
    Guess thats as good an excuse as any to swap the slip-on order for a full system - not that much in it from the old style slip on to the racing line.

    Slip on seems to have an exhaust servo/valve in the pipework whereas the full system doesn't - if I did go full system route do I just take the exhaust servo cable out and leave everything else in - will that produce no errors on the dash?

    Ta
     
  14. LRJimmy

    LRJimmy Active Member

    Joined:
    Sep 4, 2019
    Messages:
    1,753
    Likes Received:
    696
    If you leave the servo connected then you wont get any errors. If you want to lose the weight of it you get a servo healer to connect in its place..,
     
    • Like Like x 2
  15. DangerMouseUK

    DangerMouseUK New Member

    Joined:
    Apr 28, 2020
    Messages:
    47
    Likes Received:
    33
    I've seen two or three on the market any you have first hand experience of?
     
  16. TheMickster

    TheMickster Active Member

    Joined:
    Dec 13, 2016
    Messages:
    395
    Likes Received:
    138
    anyone know if it would work with this one, or is it a non starter?
    ECFC63B8-04B9-4F57-9159-4C30A5693E02.jpeg
     
  17. 7belowzero

    7belowzero Active Member

    Joined:
    Nov 26, 2018
    Messages:
    49
    Likes Received:
    62
    I think you may struggle, as it looks like the silencer comes out too far. Hard to say for certain, without offering it up.
     
  18. TheMickster

    TheMickster Active Member

    Joined:
    Dec 13, 2016
    Messages:
    395
    Likes Received:
    138
    Cool, yeah thery're fairly expensive to just buy and try it on the off chance.
     
    • Like Like x 1
  19. Fwsock

    Fwsock Active Member

    Joined:
    Nov 4, 2017
    Messages:
    207
    Likes Received:
    49
    How much weight you think you saved with the holes mate? I’ve got one and wondered if it was worth taking it off to do the job.
     

Share This Page