Separate names with a comma.
Good you were able to recalibrate, but just as a side note - gearing has absolutely no relation to the operation of a GI Pro indicator on a 08 bike.
On the contrary, I have seen many 3rd gears fail, including my own, so it is not a ghost story at all. It is usually hard track riding / racing...
+1 for the SBS Dual Carbon pads. They do wear out somewhat quick, but in terms of stopping power are a single finger operation even with the stock...
No. Everything is different.
No need to change the ECU. That being said, ABS light will be always on as long as you can live with that.
Don't forget Bazzaz TC
Noone really, lots of track riders here? Makes me wonder whether people have simply moved on from piggyback systems or its just that everyone is...
Hi folks, Looking for feedback from anyone with experience setting up the Bazzaz traction control system. I recently installed the full Z-Fi TC...
Well, I'm looking for ideas and existing installation photos, so I can minimize the time staring at the tail section and scratching my head...
Hi folks, I am in the process of installing a complete Bazzaz ZFi TC unit, along with the quickshifter, TC and Map switches, TC Active light and...
Do not confuse disconnecting the servo with disconnecting the O2 sensor. The hunting on idle is to be expected with any aftermarket slip-on,...
You can either remove the cover if you just want to try it or if you do like it, you can trim it with a dremel so it clears the shift rod.
Also - clutch cable
Hi folks, looking to buy the following parts for 08-11 1000rr - Forks, preferably black (Mint, no scratched or banged up offers please) -...
Hi mate, I will check, I think I still have them. Don't want anything more than postage. Have in mind that I live in Bulgaria, but I doubt a small...
If you compare the keyswitch wires, they are much thicker gauge than the wires on the killswitch and I was a bit concerned about this at first....
Onto modifying the handlebar control wires: [ATTACH] [ATTACH] The 2 cut wires are what the start/stop button connects and disconnects...
[ATTACH] So if you look closely, this little harness does 2 things: - shorts 2 wires on the bottom plug together - connect the corresponding...
Now onto eliminating the key switch. Some of you may be familiar with the Woodcraft keyswitch eliminator harness, that plugs inline with the...
After everything was removed here is what I was left with: [ATTACH] [ATTACH] After everything cut was soldered and heat shrink wrapped:...