Separate names with a comma.
That will be because of the open and closed loop effect
Still might be worth having a fuel line test , even whipping the pump out and trying this...
Did you check the FPR at the same time
Should be right lower corner of Air Box (3 Pin) and associated airpipe, check they are seated ok and pipe is not kinked and is attached. Off a...
Not really an item that goes wrong, would check connectors wiring and air lines to the sensor, unlucky if you would need a new one
Could be possible MAP Sensor fault
Got it through its MOT [img] [img]
Got this today for my CBR929 , as you can see its for a different bike , wires were different coded but it was plug-n-play, started a treat,...
It certainly is matey :D
SC82 is 1400 +/- 100
Basically all you need is a Blank Key, A Chip and someone to cut your key, I got 2 Keys ,4 chips from Aliexpress , the key programming is in the...
Hi , what colour wires are running to it , offhand Blue connectors (3 wires ) TPS , CMP, and Knock sensor, was the bike running previously
Or you could just try starting and stopping the engine , go through a few cycles , might go away
Could you have a wheel speed sensor fault
Good Luck Mark , probably only dislodged a connector/wire while you were doing the other job;)
Have you done the Line Open Circuit Inspection between SCU34pin Black connector and ECM 39Pin connector for continuity as per manual
This might help , for sag and rebound
Hope this will help[ATTACH] Is it the EGCV or the EGCA your looking for? . Have put up the later type or [ATTACH]
Try splicing into the horn for key wired, there are 4 separate wiring diagrams for this bike;) [img]
How do you confuse a Man Utd Fan