2015 decat

2015 how do i decat my blade i have an akroprovic gp titanium pipe thanks in advance

 

The cat is in the headers on the 15, so a new set of headers would be the easiest way

 

55mm core drill did mine just fine

 

What do you mean???

 

I've got a core drill I use for making 55mm holes through brickwork,works a treat for drilling out the cat in the headers

 

Still don't understand what you've done tbh. Do you take the headers off and drill in them?

 

No Alan,take off the end can from the headers,look inside and you'll see the cat,I used a 55mm core drill to remove the centre then chip off the rest of the material belonging to the cat
Hope this helps pal

 

Is this difficult and would it throw up any warning lights?

 

Also, would I then need a PC5 or ecu flash?

 

Just cut the whole cat off and weld a piece of pipe in,

 

Would I need to adjust fuelling sfter that?

 

Preferably yes, doesn’t matter what way you go about it, you’ll have to map it to get the optimum fuelling

 

Thanks