Separate names with a comma.
Worth servicing before fitting, maybe the right spring for you. I’d also pull the swing arm and linkage for a good grease up.
Hi welcome. Did you move the engine position with no tensioner? If you have,I’d be concerned that one of the tensioner blades have been...
Alarms and trackers murder battery’s
Middle of the grip should end up close to where it is now but with less rake. Should pull you forward and elbows out.
Swapping them over providing you have the clearances. Means that the bar starts at the rear of the fork so you can set them straighter without the...
Town
Brew
Furnace
http://www.cycleterminal.com/motorcycle-connectors.html
@Boothman Agreed this issue needs to be sorted ,then the fuel removed from cylinders and probably an oil change. All before attempting to crank I...
Injectors stuck open or is there constant power to the injectors would be my thoughts
You could block off the fuel line to prove the pump regulator switch. Is every cylinder filling up?
I'd remove the q/s and pc5 first, then see what you have.
Probably best to have a chat with instructors in the area. You should be okay for timings with it being December / January. Don't forget you need...
@bazzashadow I've seen a guy on my telly with 44 teeth on his leathers. Maybe of interest to you
Although not an official part this gasket fits 08 to 14 and is definitely worth using one....
There's a couple of cross head screws in the headlight.
What did you actually get for £750? Valve clearances, any large items?
Have you used it much lately? Might just be corrosion on the switch and need a little contact cleaner. Might be an idea to get a multi meter.
If you watch it on the discovery + app. Top right corner of screen, you can change the commentary to German or off.
