Separate names with a comma.
good find, best solution products alwasy have different specs for different parts of the world (cars, bikes to name few) some minor, some major...
once you have checked all your vaccume pipes, an ECU reset would be next on the list. Although from your video, the engine is still running...
doesn't 21 model come with LFP battery? If so, the voltage shoul stay above 13.3v even after 2 weeks of non use. Because of their low capacity,...
The worry is over. While waiting, I used penetrating spray, let it soak for a couple of hours and it came undone! Maybe it was over tightened when...
I have removed the wheel to have a new tyre fitted and since the caliper is loose and the one pad is down to 2mm, I thought I put new ones in. The...
He sat out a couple of races so I guess he has been penalised by this and the fact that the penalty was not dished out with not room for...
If it is a genuine French bike, then the mode was done by Honda or the authorised dealer. Could be a hardware mod or a software one I would not...
yes all bike are restricted to 100 or 105 bhp in france. There was talk about doing the same in the uk so I bought my RR8 at the time just in...
if by used, you mean left over then it is pretty safe to use if it is kept is a sealed airtight container
top of my list is CTEK, second optimate followed by battery tender junior. Bottom of list, noco. I have used all the above. Got to noco when I...
Must sya I used the original muc off pink for many years without any issue. I was very mild. I since switched to bilt hambert snow foam
Our potholed, gravel covered and gritted roads are bike killers. Some suffer less than others. most vulnerable parts are plain steel ones like the...
I use bilt hambert snow foam with a pump sprayer on wheels and lower parts of the bike including the engine. No such staining issues
Well I got down to it, used my old brass bristle brush and chain cleaner to rinse. Managed to get rid of whatever salt redisue that causing the...
I hear you :) and can’t argue! It’s not that bad. A couple of spots around the head of the pin which a brush has difficulties. I tend to do my...
yeah a blow torch will help you set the bike on fire;) A heat gun would be safer. Is the bolt corroded? My guess is was put on with too much...
has anyone experimented with using rust remover on chain to remove rust from difficult to reach spots: side plate, top & bottom of links?
yam lube synthetic is a quality oil, if my memory serves me right, my dealer said is was made by Motul. I personally do not subscribe to 10/30...
on the back of a recovery truck?:D the bikes look amazingly clean considering the road conditions
I went for pilot power to pilot power 3. Unfortunately this turned out to be a sport touring tyre without the quick & sharp handling of the old...
