Separate names with a comma.
It's a very complex issue. Some of life is random but mostly it's planned. The game is to change things very slowly, so most don't notice, and...
This thread was exactly the sentiments I felt after a ride last Sunday. 20mph zones, cameras, it's everywhere, even noise monitors proposed now....
No, not new assembles, they rebuild the original forks and shock from the bike but to their spec of parts and oil. I believe you can buy their...
Oh yes, I forgot to say earlier, all the 04-07 Blades are a pain to do essential maintenance on. I've just done swing arm and head bearings,...
Just my 4penny, forget wasting money on fairings and do the big gains, see how you like it then. Ktech forks and shock rebuilds, and have its...
Preloading a bearing means to slightly tighten beyond touching to leave a positive compression of the rolling elements into the races. Not all...
Pretty much everything on the SC57/A is more awkward than the later bikes, they seemed to have forgotten to package for maintenance, so this...
I've just done the head bearings on one of my 07s. They'll be small differences to an 08 but these are worth saying; Be very cautious resetting...
Indeed. Watch 44Teeth's latest dyno run of the new S1000RR and the recent group test comparing it to the 2019 Blade. It'll take a miracle for the...
I've got three RR7s, two Racing Reds and a Repsol. I bought all mine from private owners and two bought just on pictures and a chat, low miles and...
Bar vibration was a big problem for me when I first got my RR7. I cured it by changing the mass of the bar ends. They float with the cartridges in...
I'm pulling the swing arm out of my '07. Collected all the special tools. Anyone done it, any tips/advice?
Well there's lots of unlikely things it could be but I'd swop the fuel pump PCV first, unless your new dyno man has a better idea, and he may well...
As mentioned above, if you've an after market silencer then they don't usually have an exhaust valve, so it isn't in the equation. The exhaust...
It looks like the same piece of none sense as the 04-07s come equipped with but I'd need to test it to be sure. I wired a test light to mine to...
The flap in the airbox is spring loaded and though open when off, or idling in neutral, will close once in gear. So long as the throttle movements...
I've got a RR7 and it's been remapped, not same as OP because it was the ECU fuel tables that were changed rather than a piggy back device, like a...
I would always start from the assumption the cyclist or motorcyclist was innocent but it's hard to defend the actions of Hayden. Riding any bike...
I've posted this a couple years ago but it's worth repeating. When I came back to litre bikes, about 3yrs ago, I was about to buy an ABS Blade and...
My bike's a generation earlier but your comments and replies all ring a bell. My '07 was ok but I noticed it wasn't possible to hold exactly...
