Separate names with a comma.
No, the ground will be by virtue of it being bolted to the engine. And it should onge vet power when you press the starter with the ignition on.
Cool, glad you got it done. Just thinking back, mine got noisier on a trip to France, so not much I could do until I got home. Turned out it was...
That does not sound good, can you get a new relay? Is it the right one? Could someone have put the wrong one in there?
OK, so going back to you comments, the starter motor should only get 12v when the starter button is pressed = and even then would be stopped with...
You have said you need better brakes - but why - what are they doing or not doing that you need more of? I would suggest the following: decent...
I doubt you will need to back it off, more like get it started at that stage then tighten it until you can hear it running quietly and no more....
You need to create as much access as you possibly can. Bendy spanners and anything else you can get - you might get 1/8th of a turn from one...
I think you need to get someone who knows what they are doing and who can follow the wiring diagram. You comments above suggest you don't have a...
I think there needs to be more explanation of the so called charger adapter. To me it could be as simple as a connection to plug your...
For least amount of faff. and if you are doing lots of trips Ventura luggage worked for me for the last 20 odd years. Not cheap, some say looks...
Get an A4 sheet of paper, draw a big arrow pointing towards another drawing of the sun, stick in your tank bag and just follow that! That said...
At this time of night, alas no! But it is about time I do something, so will see if I can break the ice tomorrow and get some taken.
As it happens, I am in Dorset, Poole, so potentially not too far away if you wanted to see/
I have a rear wheel and the rear part of the exhaust. Also front wheel, forks abd rear shock if that helps? Where are you?
It is not likely to be anything serious, standard thing that happens after doing what you did. Basically as the engine did not get fully warm when...
From what I saw, Irwin's ambition outweighed his talent. He was the one who was never going to make that corner, and was not even far ehough...
No worries. I had two ABS blades, and did over 50k miles on them without issues. However many on here have had issues and prefer to rip out the...
And still you got it wrong - you sure you are safe riding a bike? ;)
