Separate names with a comma.
The R&G line set (at the time made by Hel) included the blocks that the hard line screw into, you get 2 lines blocks for each of the calipers. see...
this is using a ladybird custom mount, fits really well, but you are right with oem abs lines its quite tight, the line is under a slight strain,...
FYI it is 12mm according to lings https://www.lingshondaparts.com/partscatalog/catalog/listing/catalog/hondamc/catkey/B/modelid/1548/block/114214/
could be wrong but isn't just a standard M12, - same as 2008+
This was my RCS install on a ABS a while back but it was on Hel lines. https://www.1000rr.co.uk/threads/rcs-fitted-to-abs.15145/ I'm fitting it on...
it was one of these but they now seem to be sold out....
no sure to be honest, they’re definitely steel maybe but plated, zinc or nickel perhap, they were light gold to begin with
I did more than 70k on my previous 09 HRC, would have reached 100k if not smashed up by a pesky c-class
Got my seals next day from wemoto, the seal where all sliding fit on the piston. The old seals were a bit various, some tight some loose. Only...
If you don't go the flash route , as long as you are confident to lift as the tank fitting the PCV is pretty straight forward. The TPS sensor is a...
Not a flash but new map on a PCV. I'm guessing the end result to be similar. The HP increase will be absolute top end, but I dont generally...
Ordered new seals too, took me all afternoon to take the calipers apart again due to the acf on the seals. Hopefully the rebuild will reduce the...
Like you said in another post the sprocket cover is a PITA to remove, don't know why it was designed that way. Probably the same design engineer...
Haven't quite finished my big degreaser test but see the results for BH Autofwheels. Haven't got the results for 10mins of soaking yet, but after...
Been doing some tests on autowheels and other cleaners, it’s really powerful stuff! This stuff in particular, apart from being good on brake dust...
Lol lovely bronze calipers, a benefit reserved for the C-abs owners club, a small consolation prize for putting up with a goofy system!
personally i wouldnt put a mechanical polisher over the decal just incase you catch an edge. Stuff like that i would tape over and get as close...
