Separate names with a comma.
Its strange not one of the phases is giving voltage, - maybe its worth removing just to double check before you spend the cash. A burnt out stator...
if ABS wheels directly interchangeable
[ATTACH]
Check this out: [MEDIA] Disconnect the stator from the charging loom, you should have 3 pins, with the volt meter check the AC voltage between...
IIRC the voltage at each phase is about 30-50volts AC, are you measuring resistance?
Whats the base voltage of the battery and the voltage when the bike is running. The stator can pass a ground and resistance check but you will...
They're a bit marmite, but I've had no problems with my warrior lift. Just needs one adaptor to be fitted. Mine has been on it the entire...
if non ABS wheels to non ABS bike then full compatibility For fronts the disc holds the pulser ring so for an ABS you need to make sure it has an...
Have a vacuum too but found you could never tell if it was air in the lines or it was sucking it from the nipples oooer. My preferred method are...
Didn't get on with reverse bleeding probably due to my cheapo kit, the tube came off the nipple and made a fecking mess!. Having just done this...
Ive had all my hondas on a PCV Mine just had an oil change but after 4 hours of dyno I felt like I should do another!
Urgh!! I hate that 2 week NIP waiting period!, last time I thought I got caught went through my video footage to calculate my average speed,...
For the Bike Chain and sprocket, plus bolts New seals/nipples/bolts for calipers Oil, filters and brake fluid Guitar Daughter has taken up guitar...
If you're up for it SwissT wrote up a version of the bleed process that's much easier to follow...
Recommend Menzerna 2500 as first stage and 3800 as a finisher using Lake county pads. Glaze over with Autoglanz SuperNova - the finish is out of...
Maybe a bit of oxidation just like you get with red paints fading to pink, but perhaps a little surprising since its only 2016. Maybe start off...
I make a point of wheeling my bike out of my garage before I ride off, any change of resistance is easily noticeable. Bit extreme but once I left...
Those Enkeis are OEM wheels just like Yutaba makes front disc, and Tokico make calipers. That version came in 2012, I believe heavier than 2008...
Fortunately the ABS is standalone but there are a few electrics to sort out....
My local has been trying to peddle them to me for years! even with quite decent discounts I've declined. I'd like to try something new but i just...
