Separate names with a comma.
I did replace mine with stainless steel ones, just because the original ones showed signs of corrosion and I had the calipers stripped anyway....
Something to keep in mind is that ABS and Non-ABS reg/recs are different so you don't accidently buy the wrong one. The non-abs has plugs directly...
Nobody has a stock spring laying around? Hmm. I may have to invest in a proper k-tech spring then.
Hi folks, I am looking for the 2008 speedo schematic? My unit was clearly crashed before, as the plug on the back is broken. I noticed that...
WTB the stock rear spring off a 08-11 shock. My shock has been through k-tech for valving and spring, however the 115N (~11,70 kg/mm) that is on...
Thanks mate.
Thanks Nigel. The belly pan is a bit deeper, but it is due to being the race (bucket type) pan, able to hold oil / coolant fluid leaks....
In my experience the Honda reg/rec starts giving up when there is another electrical problem with the bike and it is not a quality issue with the...
A little sneak peak folks. The previous owner had planned to repair the bike himself and had acquired a set of fiberglass fairings from a local...
Hi folks, I've noticed several mentions of facebook groups while reading through the forum. Can you please let me know which are the most active...
Sprocket shaft... we started with this [ATTACH] Midway - after a lot of scrubbing and soaking in rust converter [ATTACH] and ended up with...
Indeed. Most people don't realize that this bolt, doesn't torque the sprocket itself, it just holds the washer against the shaft. But the sprocket...
Sprocket, washer and bolt thoroughly cleaned. [ATTACH] [ATTACH] Upon closer inspection, I now consider myself EXTREMELY lucky. Do you see...
As promised (Nigel ;)) now that I have a rear wheel in place, lets sort the front sprocket area. [ATTACH] Wooden strut wrapped in a rag through...
Absolutely. Although i dont consider this nearly complete. There are still a lot of cosmetic issues to sort, fairings to paint etc. I will be able...
Yes there were plenty of new copper crush washers. In the end I fitted both 20 degree fittings to the 2 calipers and the 2 other - up at the...
At this point folks, I need to route the clutch cable, rivet the chain with the new link and I consider the bike ridable. Next is fitting the...
And finally for today - front brakes bled. It is a huge pain in the ass bleeding a completely empty system without a vacuum bleeder to draw fluid...
Renthal medium compound grips installed. I've heard a lot of people complain that the medium compound were colored grey instead of black. I...
Rad fans taken apart and cleaned. [ATTACH] [ATTACH] Detaching the rad from the upper mounts and leaving it connected at the bottom should...
