Separate names with a comma.
We got power. Didn't get the starter turning on video, but it did. https://streamable.com/n8qts
Good point about finding neutral on the track. And good question. It was set up to gp shift when I got it. However, considering it will be an...
Can I upload a video?
Actually, now that I think about it I have a 3rd option - do not bypass, nor connect the clutch sensor. In that case I will not be able to start...
What about in gear? If you push the starter button, the motor will not turn unless you have the clutch pulled in. To start the bike there are 2...
Yep, just testing if the starter is getting power and turns over. Couple of turns and that's is. I am yet to put the gas tank, connect the fuel...
Wire harness in place and routed properly and secured with all factory clips in the tail section. You can see the empty space next to the battery...
Starter positive wire connecting it to the starter solenoid. The one I got form the donor bike was a bit too short due to the different...
Alright, good morning folks. Another set of pictures coming. I did mention the alternator cover has not been bolted on, as the actual alternator...
Glad this thread has been so inspirational :D:D
Speaking of small bumps in the road. Abs vs non-abs again. Donor bike was an abs model and I took the key, ignition switch, immo reader, ECU and...
Thanks a lot guys. Things are moving along nicely, although small issues keep coming up which are slowing down the assembly until I address them...
Ran into another problem - bolting the engine down, the right front engine mount turned out to have its threads stripped. :eek: When I was...
I second that. Get a motorcycle trailer, they are not that expensive and are really light so easy to tow around regardless of what your car is.
I did mention this part a few posts back. This is an exhaust servo eliminator / servo buddy or whatever you may want to call it. The bike has a...
Thanks a lot folks, glad you like it. It has definitely been very frustrating at times, but I think it turns out quite well. I've hit a couple of...
Oil pressure switch wire and boot installed. Routed with factory brackets and clips. And finally - hey look - no hands... uh I mean - no wooden...
Before going back to the wiring, I wanted to get a few other bits done. Upper and lower head bearings in place and packed with grease. [ATTACH]...
Heh, it did get polished and wrapped, prior to connecting. Sadly I forgot to take pictures :oops:
Can you guess what that is? [ATTACH] [ATTACH] [ATTACH] [ATTACH]
