Separate names with a comma.
so, you do it again, remove the baffle this time and enjoy your exhaust as it's meant to sound :).
Dremel the hole just a little and a thin walled socket fits. The weld breaks no broblem when you turn the bolt open.
Yes. This is the first thing to do.
this can be done much easier. only outer plastics needs to be removed completely. no need to remove tail light and under tray. then remove one...
What you think arthur, can i put these '14 slash cut stacks to my '12 with PCV tune? Im wondering cause in '12, long ones are in the middle and in...
You sure you did the calibration in PC5 software right? Just hit reset and then blip to WOT?
Checked the TPS connectors?
That's part of gilles rearsets or shifter kit, it sits a little farther out than OEM part. Oem part fits normally.
No spring needed, there's enough "spring power" in brake master.
Think he's about to receive his first negative feedback?
Did you check if the TPS is become loose for some reason?
Maybe i misunderstood, but did you manually change the 'current' value? if you did, hit reset again and just blip to 100% and don't do anything else.
Only thing you should do is hit 'reset throttle values' in idle and then blip to full throttle and thats it. Then shut off the bike and check...
are you sure your throttle cables are correctly adjusted? Flaps close and open fully? Also bike should be fully warmed up when setting throttle...
it was pain in the ass, but it's there. Installed with new honda stock port gaskets.I did quick check in idle and everything seems good, no leaks...
Seems that Akra doesn't bother to answer questions to us mortals, so i did send mail to Calsport, cause I knew they have a great customer service...
yep, bet i go crazy before the system is installed :p
haha, i think after all, i need to hear that from akra ;)
o_O Calsport: All parts required for fitment are included (brackets/fittings/link pipe etc.) with full fitting instructions. This is developed to...
okay, thanks. I'll email them just to be sure, because similar Yoshimura full system instructions says: "Remove stock exhaust port gaskets as...
