Separate names with a comma.
Ok, thanks for the advise. I'll have to strip the fork down again
Would I get strange tire wear or handling problems if this rebound is set too much on one side ?
Yeah, that's the locking nut that goes with 26 right ?
Yeah, set them both to the spec as per the cbr manual
I've set them both 1 turn back in from full, but I wanted to know why one has 4 full turns and the other only has 3, could there be a problem with...
Hi I changed the seals and fork oil, put the forks back together and on the bike and now the front rebound on the left side has 4 turns but the...
Has anyone tried/got feedback on "Harrys laptimer" app for the iPhone with a gps add on like an Emprum Ulitmate GPS, or just using the built in...
been looking online for a kit and came across this - Fork Piston Kits £300 for an Ohlins kit ? doesn't sound right, or is it just a very good...
yeah, I was thinking the exact same thing :). I'll check it out on youtube and see how hard it is to do.
thanks Slick, that simple for me to understand my choices. £300 for springs and oil vs £600 for springs, oil and valves. Will I really notice...
thanks Skippy/Colin, I thinking springs and oil change is the way to go. PDQ aren't too far, i'll see how much they quote. any suggestions on...
Hi my 2010 ABS blade is probably due for some attention on the forks, its done 10k miles and i'd like to see if I can get a bit more confidence...
all sorted now, it was one of two things, the LCD was showing C and E for the rod and i tied the LCD cable a little too tight with a cable tie,...
should the LCD screen display the settings when i turn the ignition on, or do i have to start the bike for it be displayed. Either way, ignition...
thanks Jason. I placed the grounds on the multipoint in my picture earlier, where all the green connectors are, seems like its grounding to the...
I seem to have a problem after I fit the new loom in, the engine pulses like its miss firing, I double checked the order and that was fine, and I...
[ATTACH] Hi, I know I'm being a pain, but I'm almost there. Not sure where the ground point for the starter motor is, but there's a something...
Exact same situation with me, seems like a bleed sorts it out.
Where did you earth it ?
I just found the HT plugs where it goes in, a right pain to get too
