Separate names with a comma.
Hi, I did a lot of research before hand and what I found was two types of kits available, you can go for an expensive retrofit kit for cars that...
Thanks guys
Hi Bit of a numpty question but is fitting/changing front pads on an ABS blade any different to a non ABS bike ? Is there anything I should be...
[ATTACH]
finished article [ATTACH]
Ballast location Thought I'd share where I placed both of the ballasts seeing that was by far the hardest part. Had to play around with a few...
ive been looking at getting these too, does look nice when on, here's some pics of one member who's already done it, scroll down a few posts to...
ok, here's my attempt of a write up on what i did. let me know it make sense and if you have any questions 1. Remove headlight from bike. I...
yeah, i thought about that after completing it, but not sure how good my explenation would be with out decent pics to demonstrate what im doing....
yeah, thats pretty much the kit i used, with 6000k but didnt connect the halo or daytime running ligh, i wanted to go for a classic look without...
Yeah, had to put the whole unit in for a few mins, have to be very careful though, mine were almost at the point of melting. The other options to...
The kit that I bought does most of that, apart from the LED trim round the sides. But from what I read, it's fairly simple, it's an LED strip...
It does get hot, but no more heat that halogen bulbs would generate, these are the 35w ballasts, the halogens are 55w. The ballasts get warm so...
The actual work wasn't that difficult but the prep work was, I needed to figure out the wiring to power both lens form low and high beams. There's...
Yeah a kit bought from China, did a lot of research in to and all ones available from a UK company are in fact similar or exact same to the ones...
Thanks, yeah it'll have twin lights with high/low on both sides. Personal preference, but I think it looks much better with two lights rather...
Hi, managed to fit bi-xenon lens to my light housing this weekend, have a look at the pics and tell me what you think ? tgosai's Album: 2010...
