Separate names with a comma.
[IMG]
Had a few CBR600s, 3 VFRs, a blackbird, A VTR1000, thought I would try a blade when they were selling out the '11 model HRC with lots of Honda...
I have always had a good run from HPs but I would rate Toshiba as good or better. I have to say though, windows 8 leaves me cold
You're lucky to have someone like Arthur there, Martin. You guys are copping some weather according to our news. Summer wont die here, 36deg...
That's something to look forward to then...........I hope they have improved the design since the previous gen.
Does the 08-11 model have a cassette type gearbox similar to 04-07?
OK you can test if a cct spring is broken or not by removing the 10mm bolt on the end of it and inserting a small flat screwdriver with a...
Whats all this about my pole? (My name is Bassett)
I'll put my money on the CCT. Honda CCts are notorious for failure, and most Honda bikes run the similar design. The tension spring is helically...
Yes, I have an 07 vtec VFR as well and the fuelling on that was atrocious in standard form with surging and flatspots etc. I have a PC3 and custom...
I tried this mod today and I thought that there was a slight flatspot when going off/on throttle at about 3000RPMs, so I reconnected the cable,...
Interesting thread. Here in Australia, we are led to believe that the blade requires 98 RON, and thats what I run in my'11 model. Yesterday I did...
This video shows how to remove the belly pan. How to do an oil change on a 2010 CBR1000rr part 2 - YouTube
I fitted helibars to my '11 blade because I am 64 YO and found the standard clipons a bit tiring after 250-300Kms. The helibars aren't a radical...
I did this adjustment to the balance shaft gear backlash and it sounds normal now. http://1000rr.co.uk/general-1000rr-discussion/3942-2.htm
Hey Pete that is really good news. It just proves to me that mine was set up wrong from the start, and that it was an exception to whats normal....
Pete its quite likely that yours is set up O.K. and isnt an issue. Mine was quite rattly at idle when it was hot, it sounded like a diesel...
Ok I have fixed my rattly engine, it took about 5 minutes, and I am rapt. As I suspected, the culprit was incorrectly set backlash adjustment on...
Thanks Pete, yeah it does sound similar. Mine says CBR1000RR8 build date 7/11 on the V.I.N plate, but CBR1000RR-RA on the owners manual, so I'm...
Hi Pete, Thanks for replying, I made a video of the engine sound, check it out and let me know what you think. 20120424_121945.mpg - YouTube...
