Separate names with a comma.
I am after some 9.5 BPF springs if anyone has any they want to sell, I find the standard springs are a bit hard, I am only using about 60% travel...
Don't forget the gas and air, those seats can get painful after a few hours :D
They do tend to state brick or concrete garage construction on the reams of small print, but when it is taken away from home this does seem to be...
I think a lot on here would send photos for £35k, Might send me £35k to not send :eek:
On one site you were allowed 5 mods that were not classed as performance enhancing and it did not affect the premium
I would have thought an 01 plate is rather old hat unless you are wanting to only use it on sundays and keep it as a show piece, the modern bikes...
They are not torque guns, they are impact guns that are great for removing fasteners in the right circumstances, you should never reassemble...
This is what Swiss T wrote You can comfortably see & get a tool on the bleed nipple without removing the headers or heatshield. I use a long 1/2...
Probably a bit late, but I am sure there was a post on here with someone using a long extension bar to bleed the brakes
I used to earn a little on the side working at a Porsche garage removing sheared studs, I did as Broadie says TIG weld a nut on then wait until it...
That is how loss adjusters earn their money
They will soon be able to find out I would have thought
In theory if the bike was originally equipped with ABS and your insurance was based on the manufactures original spec, If you had a crash that...
And then replace the benefits office with NHS dentists, no chance of seeing anyone for years
AI and the like will only make the rich better off, a few more billion for elon musk , my working week has increased since I started work in 1980,...
I am an engineer and I usually use a battery drill on low torque setting if I have a lot of bolts to fit then torque up with a wrench after, As...
It is supposed to be totally inert so will mix with any substance,
I should have taken photos but you never know if it is going to be any good and how long it will last, I will put future posts on how they are...
Nothing worse than stripping it down and finding nothing, Well done so far, hopefully you or LBS will sort it
I came across a substance called tungsten disulphide powder, This is supposed to give the lowest friction coefficient of any material, it was...
