Separate names with a comma.
Once the bike is on it's side there is no need to steer wih the bars. Due to the shape of the tyre and the angle of lean once the bike is on...
Ok cheers I went up 1 ramp to position 5 on the rear to get 30mm and have 35mm on the front. I can go softer on The front as Im not using all the...
Did you alter the sag settings? What did you change on the damping front and rear?
The idea of hanging off the bike is to keep the bike on the fat part of the tyre (I.e keeping it as upright as possible) while at the same time...
Like I said before the reason they give those pressures is to provide a tyre which works for more than one person in more than one environment....
He's a top bloke. I was happy to see him win on the big bike at this years TT. We shared a garage with him at donington a couple of years back....
I cut 30mm off each side and the 20mm banner with dealership name off my standard numberplate. Just used a hacksaw and rubbed it down with a...
That's right mate Or if the connectors fit the OE plugs as they are you can just leave them long and coil the wire up or route it in such a way...
Just thought you must have unPlugged the 2 spade connectors already if you have removed the OE cylinder so all you need to do is fit the spades...
Just unplug the 2 spade connectors on the OE wiring and cut the new brake switch wires to length and crimp or solder new male spade connectors...
i push the bars and use my feet to steer the bike. if i can't get my arse of the seat and use my body weight i feel like i can't turn the bike.
nice one. it will look much better once fitted! i was bidding on a quick shifter and QEM on ebay and nobody was bidding except me so the seller...
no bubbles mate i clean the panel with window cleaner then i spray soapy water on the tank and fit the sticker. gives you a couple of chances if...
no problem do what your doing and pull it back about 20mm look inside the seat unit and you will see 2 tabs either side. these lock into...
Just noticed the seller lives just a few miles from me! Bet he is gutted. I've seen them go for over £100 loads if times
Wow that's a bargain price! Nice one Glad I could help! I thought that would have got a good few bids In so you got a good find there. How much...
Fitted mine tonight I took the tank off and did it in the house which is a bit easier. [IMG] [IMG]
Did you get out today masher? Me and a mate got out today and was raining at mddleton do decided to try Helmsley instead. Half way along Helmsley...
Your better off sticking with the OE bars as like said others are far to low, asthe blades are offset higher. If you fit lower bars it will upset...
It's pretty easy to do. Just use loads of heat and begin with an oversized sticker for plenty of overlap My mate has done his forks and...
