Separate names with a comma.
Did u get them off ebay jj £150? :D
[IMG]
Martin get ya self on YouTube type in Anodising ally mate, do it ya self only cheap & with you bad arm you can sort the boys out on the forum...
With u Martin anything will last a lifetime as you don't ride much as your always fuckin about with broken bones lol
Changing rear wheel would crack powdercoat! The chain could chip it. the chain adjustment would crack it. The shock would not fit in as powder is...
Don't think its anodised on the swing arm as I've seen few scratches on friends bikes an its not powder as its very thin coat. Anodising is...
Something like that martin and powdercoating is sprayed on then oven baked for few hours or over night
No its not. Its put on via electric feed
Black ones on ebay from 40 to 70 . I wouldn't power coat swing arm, if it gets chipped its a big chip as powder is thick. Can't touch it up as good.
Might be bad earth on bike. Have you checked the battery see if holding a charge
Class remal :thumbup:
Had are yearly footy match to raise money for the charity and for are close friends that have pasted away too young:( good nite followed by a...
Have jump leads on her ? See if she wakes up ?
Ebay item number 110947071654 £59 mate in uk to :D
Disconnect your bike battery and connect jump lead to the bike leads and put to your car battery (dont start car) see if this starts your bike off...
My is the same at 5000rev to.. If stator gone bike wouldn't bump start up. The fuel pump wouldn't work or injector as not power to reg or battery....
What year your bike? It might be your battery not holding charge? my bike the clocks when off an then started to splutter. Got jump leads on it...
I had same problem last year my bike rr5 I had a lose connection where the wires go in to reg? I cleaned it with wet n dry 800 sandpaper (dry)...
2006/07 fairings can fit 2004 /05 bikes only need to change top radiator mount and coolent bottle. So if the frame are the same on 2008/12 an...
The rub down by hand 8 to 10 hours if you going down to the plastic. I'd take it down my self for better job on prep better paint job at the end....