Separate names with a comma.
Had a similar problem with my yoshi w/o baffle, it will still hunt with an eliminator. Richening it up helps. When I put the baffle in the...
The 12+ version uses the conventional connections to all lower injectors and TPS separately
you have the 08-11 version, no2 and no4 (and the TPS) are connected via the subharness connection
hellooooo.....
[ATTACH] the leading edge normally wears faster but I also get one pad go down quicker. I generally rotate the pads to get the most of off them....
Is the gasket between the OEM muffler and headers reusable? I ask this because when I replaced the OEM can with my yoshi has to destroy the...
Assuming yours is new, not familiar with the post 13 blades but for 09-12 seen anything from 4-8 hours quoted for the bleed. The time is due to...
Blocking the PAIR shouldn't make any difference performance wise. It may reduce popping on the over run. Total removal will declutter the area...
Found some easy instructions if you just want to block the inlet hose to disable the PAIR.
OK the fix reflanging the pivot pin is temporary, the flange will distort again returning you to floppy mirrors. see picture of the pivot pin...
AFAIK the ABS ring connects directly to the wheel (not the disc) therefore the rear disc is the same between the ABS and non ABS
http://1000rr.co.uk/threads/brembo-rear-caliper-and-lower-mount.19228/page-2#post-293301 weirdly only looked at this thread the other day
Bring a USB stick with you and ask the tech to download all the runs onto it. If you like to analyse stuff you can put all the data into the...
Dont run one on my bike but used to in the car. Most fixed cameras will be covered by GPS based units but IMO you will not be able to react...
Those clutch levers are longer than the proverbial arm of the law
If your talking rr8 onwards the cat is in the Muffler, replace the OEM can means you are removing the OEM cat. Only a few after market systems...
I used thumb tacks on the first fitting to get the cover nice and taut then used the staples. It can be a bit fiddly getting the staple gun into...
My boss has one ,it sounds and looks great!!. Much smaller in the flesh which is great as it makes me look taller!
My local advised #5 weight oil (whatever that is!) but that was with a ktech revalve and lower rate spring, much smoother on the bumps, I'm about...
Thats right!, I get both front and rear fitted loose for another £20
