Separate names with a comma.
Put this on before but do check the Banjo bolts for swarf and clean out appropriately:)
The hpk disc, M4 or both?:)
Been wanting a set of HPKs for a while now, my OEMs are slightly warped and when the buttons are seized up you can notice the difference. Been...
guessing you talking to me? No still have the OEM on mine, the HPK quote from DT was nowhere near that, for less than 400 sheets the HPK are the...
[ATTACH] -high fusion - duff photo apologies!
Judging from the link please do triple check that they are indeed compatible with the ABS. The right disc should be tapped for the sensor ring....
Hey Gooner, Considering putting 2012+ fairings on my 09. know you need 2012 lights and tubes but are the rest a ball ache?
320s OEM on 2008+. Not sure what you need to do make 310s fit?
I've always a combo of baby wipes and Nikwax products
saxonseats | eBay these are similar, got the hrc version on mine
Aw man that's a bummer about your brakes. If you need a hand I can help you out with the brakes and help out if you need an ABS bleed - done...
knew you would come around!:)
dunno if I mentioned it but GB racing covers fit under the ABS cover. essential mod for any bike IMO
hey yeti!, Last time we spoke it was outside Halfords in Uxbridge discusing ABS bleeds and european touring! Hopefully you have the steering...
forget my comment on self bleeding this only happens if the coolant expands (into the expansion tank) obviously the Evans doesn't do this!
You will need to remove 1 fairing bolt and the gear selector to remove the abs cover. Removing you just pull it off refitting takes a bit of a...
Not really familiar with the running temps of Evans but it should cool down once the fans kick in The system should be self bleeding to a point...
[ATTACH] right hand side, routed along the dash mount then under tank.
some steels are austenitic ie not ferritic so may not be detected using a magnet. looking at my old thread...
Just spent 80 hard earned on a right hand side mirror (after market) to find it was not to the OEM spec...
