Separate names with a comma.
Hope you are enjoying your bike. I think my RR8 came with BT015's. They didn't impress me as OEM tyres but were not unsafe or dangerous. Before...
Are you sure where about the red line in your picture? I believe the alignment point is at the end of the block and not where the red line is. I...
Sound good guys. I am in two minds between Silkolene pro-4 and motule 300. I recently noticed a new terms used "synthetic technology" to trick...
8k interval should be fine for normal/ fast road use specially when you use quality synthetic oil. If you did 8k over a long period (say 1~2...
thanks pal, I take it you had no issues with the tape either melting or burning off once the caliper heats up. I was thinking more in terms if...
:Dgreat guy - love your handy work on plastic bottles mike-- I read about ptfe tape to seal the bleeding valve. I guess you have to remove it...
yes bought one. it was rubbish! I ended up using the old spanner. One prob with vacuum style bleeders is that there is a chance that air gets...
I think bennets are they only ones who list mods that do not affect your premium. Cosmetic mods can make the bike more attractive to thieves and...
Wise move. eurocarparts always sell philips extreme visions at half RRP
ON the RR8, the exhaust silencer has two valves, ECV which opens above 3000rpm and changes the sound from the exhaust and EGBV 7~8krpm. Chance are...
YEs you can cause damage if not premature aging of the reflectors and the plastic lens as much more heat is generated. In the days of glass lens...
check product group test on autoexpress for comparison. My gauges are to 0.5 PSI of each other and that of calibrated tire fitters. I try to take...
which web browser do you use?
I use a couple of analog ones and a michelin key ring digital one for portability. IT is very small and also has a tiny flash light for you to...
has anyone tried these or has some feedback?
the new design is slow to load and full of pop ups which are distracting.:( any chance of lightening it up and making it more efficient so that...
When you are on the move, then 3~5 mins minimum will give you a good enough indication perhaps less accurate. By default, I do it with the engine...
you are welcome. the key is to work out the capacity from min to max marks on the stick. may be slightly different to mine worth a try anyway....
I measured the oil quantities at my second oil change to determine the top up capacity on my bike. Here is what I found but remember I just used a...
my golden rule is to keep the level mid way. Never at the top mark.
