Separate names with a comma.
I was expecting something like this! Massive Suzuki GSX-R recall - | Motorcycle News | Bike News | Motorbike Videos | MCN
That is a shame. :mad: I was confident your efforts with Honda and VOSA would come to fruition, I was almost expecting a recall letter to get my...
You've got it plugged into a 9v battery right? Apologies if you've done this but thought I'd check:)
+1 or adding the new can he hasn't reset the servo correctly
You need to lift the tank completely underneath is that plastic case with the ECU on top, you need to unclip the ECU and remove a few screws then...
You’re lucky to get 14K out of the OEM and still have a good chain. Mine was dead at 12k, at this point the slack differed as much as 30mm. It...
The job is even easier if your lines are made properly ie the banjos are in the correct orientation and lengths are just right so they fit nicely...
^^ I love it when you can use maths in real world scenarios!! So using this ratio I calculate for the 32/30 Tokicos on my ABS (I think that’s...
Yes, you're right there Sinewave, the ABS ECU will decide how much pressure can be applied at the pistons but from the reviews I've read the RCS...
The angles on the blocks you have on those ABM/Hel lines seem to fit much 'nicer' than my R&Gs but I agree the performance seems to be sharper...
After testing everything was safe took the Blade out for a spin. Wasn't expecting much but there is a marked improvement in both performance and...
A dealer will charge an hour or 2 to fit but will probably add several more to do the bleed! So this route would be quite pricey! If you are...
Thanks SW, its a little disappointing that they are not threaded, what did Hel/R&G think would be used to secure the lines back to the bracket....
With the ignition on flick the kill switch off then on, you should hear the fuel pump reprime and other diagnostic clicking, if not its the switch...
Do your 'proper' Hels come with threaded block? This was the only real downside with the R&Gs
Just fitted a set of front braided lines to my ABS. They are branded R&G but are manufactured by Hel. Took a few hours in total including a full...
according to this 2009 Honda CBR1000RR ABS: Maintenance: Engine oil: Level inspection 500ml
Defo does not fit 2012+ different harness, 2008-11 only:)
Bleeding is straight forward. If you're not that confident just do a dry run on the bike, find the bits on the bike you need and practice the...
I came from 10 years of nakeds so when I got the Blade it was like torture, to top it up I'm 5'4 on a good day. Took a few weeks of riding until...
