Separate names with a comma.
Not until I find one I like, Some of those look like my boot is gonna touch down, I'm now wondering if my foot position is all wrong. [img]
and very nice of them to dedicate an entire folder to my bike 69 too :D...
Fantastic headbutt, what a piece of work...
Just keep this page open until 9pm tonight as a reminder and set it record in your 7 day guide ;)
Having been out to double check on both my bikes, I should point out that my RR5 road bike is flush, but my RR6 track bike has exactly 5mm showing...
+1. Missed out on this, although the bike's ready to roll, I'm low on hall passes :o
@SimonRR Just found some vis on YouTube. Looks like Inters. [MEDIA]
I use the Supercorsa's on my track bike, they wore reasonably well on my old Trumpet 600, but I've only done one track day with the new ones on...
It's worse on a track day when you've just changed your tyres, only to forget to pump the brake lever before setting off towards the first bend at...
Here's a few ideas depending on the model just do a search:- Drill through the baffle in the exhaust. Intake flapper mod. Remove exhaust flapper...
If you mean how far up the yoke are the tubes? Mine are flush with the top, only with the caps protruding above the top of the yoke.
Here's one perhaps for Craig then. If the bottom end is for removing the core, the top bit is for pulling the valve through, I'm guessing the left...
I may as well keep a running update then. Donnington:- June 30th - Shammy & Julian confirmed. SimonRR & Muffking TBC As for the dates below,...
Yeah I wouldn't lose sleep over it. Been charged to dispose of my car tyres many a time, but pikey's are thin on the ground where I live so I...
These are the dates for July & August:- July 9th, 14, 28th, August 4th, 26th. Voting (for as many as you like) starts now ;)
Cut the old valve off, push the new one through the wheel and screw the tool on where the cap goes, then pull it hard to the valve pops into place.
Well feck me, that's what it's for. I've had one of those for years and never knew it was a valve puller too. I even ended up buying one of those...
I think it's been covered:- Tyre remover inc bead breaker. Tyre bar (or levers & rim protectors). Tyre soap and small/medium brush (I use a cake...
You've not seen my balancer then. Complete with adjustable width dowling ;) [IMG]
Good luck with that. I said that I'd come back when someone bins it, and you should have seen the look I got :o but guess what happened in the...
