Race fit exhaust

Discussion in 'Mods, Upgrades, Accessories and Products' started by Noel, Nov 26, 2018.

  1. Noel

    Noel Active Member

    Joined:
    Feb 28, 2015
    Messages:
    185
    Likes Received:
    74
    I might have asked this before, anyone fitted a race fit growler to 17/18 blade?
     
    #1 Noel, Nov 26, 2018
  2. hitch

    hitch Elite Member

    Joined:
    Jan 27, 2017
    Messages:
    2,158
    Likes Received:
    990
    Is there anything specific you want to know?

    I've got a Black edition on my '15 plate and can offer the following advice...installation is a doddle; you WILL need earplugs, they are VERY loud. Fit and finish is exemplary from Race Fit. They're aftermarket support is fantastic too.
     
    #2 hitch, Nov 26, 2018
  3. Noel

    Noel Active Member

    Joined:
    Feb 28, 2015
    Messages:
    185
    Likes Received:
    74
    Thanks hitch, I wear ear plugs anyway. I can get it on 0% tick, think it has to be done
     
    #3 Noel, Nov 26, 2018
    • Agree Agree x 2
  4. hitch

    hitch Elite Member

    Joined:
    Jan 27, 2017
    Messages:
    2,158
    Likes Received:
    990
    Do it! ;)
     
    #4 hitch, Nov 26, 2018
    • Agree Agree x 1
  5. Noel

    Noel Active Member

    Joined:
    Feb 28, 2015
    Messages:
    185
    Likes Received:
    74
    I’ve finally pulled the trigger on the race fit growler. Thoughts on Pipercross air filters please.
     
    #5 Noel, Dec 8, 2018
  6. Ravsta

    Ravsta Active Member

    Joined:
    Apr 2, 2016
    Messages:
    128
    Likes Received:
    54
    Too late on this question but yes I have a Race fit on my 2017 blade. Its not offensive loud, just loud. Beautiful bass tones :)
     
    #6 Ravsta, Dec 14, 2018
  7. Noel

    Noel Active Member

    Joined:
    Feb 28, 2015
    Messages:
    185
    Likes Received:
    74
    Nice one, just got it through the post yesterday can’t wait to get it on
     
    #7 Noel, Dec 14, 2018
    • Like Like x 1
  8. Ravsta

    Ravsta Active Member

    Joined:
    Apr 2, 2016
    Messages:
    128
    Likes Received:
    54
    You're gonna love it. The only fitting tip I can give you is take your time removing the butterfly cables from the original exhaust. There is a small metal housing around the valve mechanism for which you will need a very small Phillips screw driver. I removed the exhaust but I didn't do a full removal of the cables. Instead I cable tied them together and tucked them away. Post a pic when you're done so we can admire it :)
     
    #8 Ravsta, Dec 14, 2018
  9. Noel

    Noel Active Member

    Joined:
    Feb 28, 2015
    Messages:
    185
    Likes Received:
    74
    Yeah I had a Pipewerx on my 14 blade so should be straight forward enough. Yeah I’ll post a pic when it’s on
     
    #9 Noel, Dec 14, 2018
    • Like Like x 1

Share This Page